Version History
Here you can find the changelog of AFRISOhome since it was posted on our website on 2020-03-04.
The latest version is 2.40.1 and it was updated on soft112.com on 19 April, 2024.
See below the changes in each version:
version 2.40.1
posted on 2024-02-28
Feb 28, 2024
Version 2.40.1
## Changed
- When logging in, a warning is displayed if read-only mode (bug) occurs
## Devices
FlexTron (EnOcean):
- ALADIN Sendemodul
- ALADIN Funk-Bewegungsmelder
Shelly Wave (Z-Wave GEN7):
- Shelly Wave Shutter
- Shelly Wave 1
- Shelly Wave 1PM
- Shelly Wave 2PM
Shelly:
- Shelly Wall Display
- Shelly PM Mini (Gen 3)
- Shelly H&T (Gen 3)
- Shelly 1PM Mini Gen3
- Shelly 1 Mini Gen3
- Shelly PM Mini Gen3
- Shelly H&T Gen3
Andere:
- Fritz!DECT 440
## :bug: Bugfixes
- Shelly 1 no longer shows current consumption (Shelly 1 cannot measure this) *
- Shelly 3EM now correctly displays summed consumption and total consumption*
- Shelly 3EM can now also display negative consumption *
- Support for buttons on 2nd generation Shellies (e.g. Shelly Plus i4) *
- Double, triple and long click can now be used
- The status of the Shelly 2.5 in shutter mode is now displayed correctly
- On the Shelly TRV, the target temperature can now be set in 0.5° increments *
- Deactivating the watchdog now works on the Shelly TRV with an active heating plan; This means that a manually set target temperature is not immediately overwritten
**_For *: Device must be queried again using the WebApp_**
version 2.40.0
posted on 2023-09-07
Sep 7, 2023
Version 2.40.0
## Devices
- Shelly Pro 3EM
- Shelly Vintage A60
- Shelly Vintage ST64
- Shelly Plus i4
- Shelly Plus i4DC
- Shelly Pro 4PM
- Shelly Plus 2PM
- Omnio UPS230/08
- Omnio UPS230/12
- Omnio UPS230/10
- Omnio REGS12/08M
- Omnio REGS12/04M
- Omnio KXJ230/12
- Omnio UPJ230/12
- Omnio REGJ12/04M
- Omnio UPD230/10
- Omnio RTF-161
- Omnio RTF-160
- Omnio UPH230/10
- Omnio UPH230/12
- Omnio REGH12/08M
- Omnio miniT01
- Omnio TST230/12
- Omnio TST230/10
- Flextron ALADIN Flextron ALADIN button single
- Flextron ALADIN Flextron ALADIN button double
- Flextron ALADIN Flextron ALADIN mini remote control
- Flextron ALADIN wireless room thermostat Suisse / Indoor-Solarzelle / 300385
- Flextron ALADIN wireless room thermostat Suisse / Indoor-Solarzelle / 300386
- Flextron ALADIN Turo multisensor / 300395
- Flextron ALADIN EnO recipient 1-channel / 300611
- Flextron ALADIN EnO recipient 1-channel pot.free / 300613
- Flextron ALADIN EnO recipient 2-channel / 300621
- Flextron ALADIN EnO blinds-recipient / 300631
- Flextron ALADIN blinds-recipient / STAK-STAS Hirschmann / 300635
- Flextron ALADIN wireless smoke detector / 300726
- Flextron ALADIN wave / proximity switch / wireless / 300050
- Flextron ALADIN Fensterkontakt II / 300754
- Flextron ALADIN EnO recipient 2-channel / 24V / 300671
- Flextron ALADIN EnO recipient 2-channel / 12V / 300676
- Flextron ALADIN EnO DALI controller broadcast / 300505
- Flextron ALADIN EnO heating receiver 1-channel pot.free / 300683
# improvements
- A matter bridge that allows some homee devices to be used in other smart home systems.
version 2.39.1
posted on 2023-06-07
Jun 7, 2023
Version 2.39.1
- Fixed a display error when updating values from BiSecur devices.
version 2.39.0
posted on 2023-04-04
Apr 4, 2023
Version 2.39.0
## Features
+ Weather forecasts are now available for the current day (morning, afternoon, evening, night).
+ Alarms can be reseted by homeegrams.
+ Device history can be disabled globally.
## Devices
+ Abus PLSG10100 Nexello Outdoor Siren
+ Abus PLMK10000 Z-Wave covert Door/Window Sensor
+ ABUS Nexello Info Indoor Sirene PLSG10000
+ Abus PLMK10100 Nexello Bypass opening detector
version 2.38.0
posted on 2022-11-16
Nov 16, 2022
Version 2.38.0
## Features
- SmartStart devices can now also be added via the QR code via the barcode scanner in the "Add device" area.
## Devices
- Support for Z-Wave Devices with the new GEN7 Cube:
- AeotecWater Sensor 7 Pro (ZWA019-C)
- Aeotec Water Sensor 7 (ZWA018-C02)
- AeotecDoor/Window Sensor 7 Pro (ZWA012-C02)
- FIBARO RGBW Controller 2
- Cyrus SmartHome Flood Sensor
- Aeotec Smart Switch 5 (ZW075)
- Everspring AN 180-2 ON/Off MiniPlug
- Aeotec LED STRIP (ZW121)
- Aeotec Door/Window Sensor 7 (ZWA011)
- Aeotec RGBW Bulb E27 (ZWA002)
- FIBARO Motion Sensor
- FIBARO Dimmer 2
- EUROtronic Spirit Z-Wave Plus
- Aeotec Siren
- TKBHOME On/Off Plug
- Secure Controls Secure Smart Plug 302 Socket Energy Meter
- Qubino Smart Plug 16A
- POPP Rauchwarnmelder mit Innensirene
- Permundo Smart Mini Plug PSC132ZW
- Hoppe Fenstergriff ConnectSense
- FIBARO Wall Plug
- FIBARO Smoke Sensor
- FIBARO Single Switch 2
- FIBARO Roller Shutter 2
- FIBARO Double Relay Switch
- FIBARO Door/Window Sensor 2
- Eurotronic Luftgütesensor Z-Wave Plus
- Devolo Schalt- und Messsteckdose
- Devolo Heizkörperthermostat
- Devolo Fenster/Türkontakt
- Cyrus Zwischenstecker
- Cyrus Tür/Fensterkontakt
- Cyrus 4-in-1 Multisensor
- Aeotec Smart Switch 7
- Aeotec Smart Switch 6
- Aeotec Recessed Door Sensor 7
- Aeotec MultiSensor 6
- Aeotec Home Energy Meter
- Aeotec Heizkörperthermostat
- Aeotec Door/Window Sensor 7 (ZWA008)
- Aeotec Door/Window Sensor 6
- ABUS Z-Wave Wassermelder
- ABUS Z-Wave Tür-/ Fensterkontakt
- ABUS Z-Wave Rauchmelder
- ABUS Z-Wave Innensirene
- AeotecDoor/Window Sensor 7
- Strip Guard 700
- Other devices:
- Support for AVM FRITZ!DECT 302
- Support for NUKI SMART LOCK 3.0
- Support for Shelly Motion 2
- Support for Shelly H+T Plus
version 2.37.1
posted on 2022-08-18
Aug 18, 2022 Version 2.37.1
# Added
* Added support for Shelly second-generation devices
* Added support for Omnio devices
* Update polish translations
# Fixed
* Added missing button to be able to learn Shelly door/window sensor
version 2.36
posted on 2022-04-05
Apr 5, 2022 Version 2.36
## Changed
* The watch app can now be started directly on the Apple Watch without performing an action
* The values of BiSecur devices can now be queried regularly
* Support for new devices
* Ability to switch-off push-notifications and email-notifications from Watchdog per user
## Fixed
* Further display errors in the controls of garage doors have been fixed
* Minor text fixes
version 2.34.1
posted on 2021-10-12
Oct 12, 2021 Version 2.34.1
## Added
* Support for new Centronic Plus devices
## Changed
* The icons of the new plans can now also be used for PROgrams and groups
* A descriptive text for the slat tracking in the sun automation has been added
## Fixed
* On the iPad the texts in the tab bar are no longer cut off
* A crash when configuring the sun automation with an awning bundle has been fixed
* The icon of repeaters was not always displayed. This has been fixed
* Minor text fixes
version 2.34
posted on 2021-09-28
Sep 28, 2021 Version 2.34
## Added
* The scenarios have grown: There is now also a sun automation. With this, shutters and blinds can be easily controlled based on brightness values.
* Something has also changed in the plans: heating plans now also support electric heating. There is also a time plan to switch devices on/off according to a weekly schedule. And with the presence simulation plan, devices can be switched at random times.
* Push messages can now also be sent as critical messages, so that they are always delivered with sound. This can be set for device alarms and individual PROgrams.
* Support for new WiFi and BiSecur devices
## Changed
* There are now icons for awning, awning and weather station
* For the websocket connection, the websocket handling integrated directly in iOS is now used instead of a third-party library in order to improve stability and performance
* The arrangement of the elements on the scenario detail screen has been revised
## Fixed
* Missing texts for the climate mode have been added
* The correct values are now displayed in the diary when BiSecur devices are switched
* The app's start screen is now also dark in dark mode
* The maximum value for the switch-off delay in the wind monitoring has now been adapted to the other platforms
* The color of the radio buttons in the sensor selection of the wind monitoring is now correct
* A back button was incorrectly displayed in the scenario detail screen on iPad
* Restrictions can now be set for all items in the list
* A crash in the search in the PROgrams has been fixed
* Fixed a crash in the setup process
* In the device detail screen, the order of the properties was sometimes undefined
* Minor text fixes
version 2.33
posted on 2021-06-23
Jun 23, 2021 Version 2.33
## Added
* There is now a new type of automations: scenarios. They should make some use cases more easy. Wind monitoring is the first scenario. When there is strong wind they move shutters, blinds or awnings into a safety position and lock the control.
* Support for new Zigbee, EnOcean, Z-Wave and BiSecur devices
## Changed
* Reset accumulated energy use of devices
* New ventilate function for supported Hörmann garage door operators
* When searching PROgrams, hidden PROgrams can now also be searched directly.
* After the successful scan of a QR or barcode, there is now haptic feedback
* During the AFRISOhome update, the individual steps are now also announced by VoiceOver
* The serial number of the WAREMA WMS Cube is now shown in the settings
* If an attempt is made to teach-in an incompatible WAREMA WMS device, an error message is now displayed
* Further configuration options are now available for WAREMA sun shading devices
* Additional device types are now available in demo mode
## Fixed
* When establishing a connection to larger AFRISOhome installations or via a slow connection, there is no longer a timeout
* Icon selection now also works with VoiceOver
* Fix selection of weekdays in PROgrams when VoiceOver is active
* Teaching-in of Belkin WeMo devices is now possible again
* When teaching in homee ENERGIEMANAGER, Belkin WeMo and WOLF devices, all texts are now displayed again
* Errors in the configuration of the WiFi in standalone mode have been fixed
* A few display errors have been corrected in the list of registered AFRISOhomes
* The back navigation via gestures in the setup process is now deactivated to avoid unwanted states
Announcement: Release 2.33 will be the last version with support for iOS 12. From 2.34 onwards iOS 13 is required.
version 2.32.1
posted on 2021-04-15
Apr 15, 2021 Version 2.32.1
## Added
* Support for MACO eTRONIC window contact
## Fixed
* The AFRISOhome language is now correctly set in the setup process
version 2.31.1
posted on 2021-03-01
Mar 1, 2021 Version 2.31.1
## Features
* Support for WAREMA WMS Cube
* Support for WAREMA WMS Devices
version 2.31
posted on 2020-12-08
Dec 8, 2020 Version 2.31
## Added
* Every user now has a presence state that can be changed via geofence and PROgrams and is available as a trigger and condition in PROgrams
* In device and weather triggers and conditions the value can be compared to the value of another device
* Email notifications are now available in PROgrams and for predefined system events
* Dropbox can now be used as destination for automatic backups and history export
* Support for new EnOcean devices (AFRISO + Eltako/PioTek Tracker)
* Support for new Z-Wave devices (Qubino)
* The app is now available for Apple Silicon Macs
## Changed
* When adding new devices the EAN code on the packaging can now be scanned to show the corresponding manual
* Added manual trigger to update location via the location service
* The process to add links between devices has been improved
* Add diary entries for failed push notifications
* Add handling for iOS 14 date/time pickers
* Add AFRISO-themed pictures for setup process
## Fixed
* Fix showing a textfield behind sliders
* In the user settings for push and e-mail notifications, the switches no longer change their value when scrolling
* Fix node history loading on app reopen
* Fix number of retries when searching for AFRISOhome during setup process
* Fix opening core release notes after an update was started
* Minor text fixes
version 2.30.1
posted on 2020-11-10
Nov 10, 2020 Version 2.30.1
## Changed
* Updated texts for the European market
version 2.29.1
posted on 2020-09-04
Sep 4, 2020 Version 2.29.1
## Fixed
* Adaptation of various texts
version 2.29
posted on 2020-08-11
Aug 11, 2020 Version 2.29
## Added
* Support for new Zigbee bulbs
* Support for new languages
## Changed
* New icons for PROgrams, plans and groups
* Moved widget settings to app settings
* Improved support for Eltako brightness sensor
## Fixed
* Fix PROgram time conditions active from now
* Fix disappearing control descriptions
* Fix updown commands for groups in widget
* Prevent clearing dashboard config when credentials are missing
* Fix showing queued notification when app was in background
* Fix various crashes
* Fix showing PROgrams in demo mode
* Fix teach in text for Eltako HSB 14
* Add localization for copy to clipboard context menu
* Fix cube colors in widget
* Fix context menu of search results in main lists
* Fix opening version screen on update push
* Fix showing prompts consecutively
* Fix teach in not proceeding after a failed teach in
* Minor text fixes
version 2.28.1
posted on 2020-05-19
May 19, 2020 Version 2.28.1
## Added
* Support for new Eltako EnOcean devices
* Notes can now be added to smart widgets
* Searching devices, PROgrams, plans and groups now includes the note and phonetic name
## Changed
* The temperatures of a heatit thermostat are now shown directly in the device list and the smart widgets climate and heating
* When a device requires a user interaction the corresponding configuration screen is now shown when the detail screen is opened
* The QR code in the HomeKit setup process is now saved so the process can now be continued when it was aborted
* The name of the home is now global for all users, it can be changed in brain cube settings by admin users
* When there is no connection to AFRISOhome, the screens for adding devices etc. can no longer be opened
* The notification handling and texts during a AFRISOhome restart and shutdown have been improved
* Tapping a push notifications now opens the detail screen for the corresponding object (e.g. device or PROgram)
* A sound is no longer played when the app has been opened via a notification
* Add workaround for problems when connecting to AFRISOhomes with large installations
* All screens now refresh when the role of the current user changes to update the controls for the corresponding access rights
* The select all/none toolbars are now hidden when there are no elements to select
* Show current search time in diary during filtering
* The standalone mode toggle now updates correctly when cancelling WLAN mode changes in settings
* Improve icon handling for locks
## Fixed
* Hide change restrictions button when there are no objects to change restrictions for
* The diary no longer has gaps when it was closed via swipe gesture and reopened later
* Fix spinners in diary
* Sometimes the times shown in diary were prefixed with the wrong day
* Fix time for first diary entry
* The screens are now loading properly when opening the app on the iPad in split screen mode
* Prevent crashes during reordering
* Fix and prevent various crashes
* Minor text fixes
version 2.28
posted on 2020-03-30
Mar 30, 2020 Version 2.28
## Added
* Support for new Wi-Fi device: myStrom WiFi Switch
* Support for new some Aeotec Z-Wave devices
* Backups of your AFRISOhome can now be created and downloaded from inside the iOS app
## Changed
* Devices used in a plan (thermostats and window sensors) are now shown on the plan detail screen
* The next occurrence of time triggers is now calculated by the AFRISOhome Core
* Optional text inputs in the add Wi-Fi process are now marked so
* All time information is now shown in AFRISOhome time zone in a device-region specific format
* The time screen in settings now has better explanation and shows the time zone AFRISOhome lives in
* The add device process for Netatmo devices has been improved
* The icons for Wi-Fi devices in add device list have been improved
* Restricted icons now show the restriction level and are better visible in dark mode
* Connecting to a AFRISOhome via IP address is now supported - just enter the IP instead of the AFRISOhome ID on login
* The HomeKit beta can now be enabled from the app
* The rating screen is now optimized for smaller screens
## Fixed
* Fix en/disabling plans via context menu
* Fix copy menu for iOS 13
* Fix crash when use select all/none buttons in voice assistant settings
* Prevent possible crashes by checking links before opening them in the in app browser
* Fix attribute change check in device controls
* Fix sort order of app licenses
* Fix some special characters in color names
* Minor text fixes
version 2.27.1
posted on 2019-12-18
Dec 18, 2019 Version 2.27.1
## Features
* Support for new Eltako Devices
version 2.29
posted on 1970-01-01
2020年8月11日 Version 2.29
## Added
* Support for new Zigbee bulbs
* Support for new languages
## Changed
* New icons for PROgrams, plans and groups
* Moved widget settings to app settings
* Improved support for Eltako brightness sensor
## Fixed
* Fix PROgram time conditions active from now
* Fix disappearing control descriptions
* Fix updown commands for groups in widget
* Prevent clearing dashboard config when credentials are missing
* Fix showing queued notification when app was in background
* Fix various crashes
* Fix showing PROgrams in demo mode
* Fix teach in text for Eltako HSB 14
* Add localization for copy to clipboard context menu
* Fix cube colors in widget
* Fix context menu of search results in main lists
* Fix opening version screen on update push
* Fix showing prompts consecutively
* Fix teach in not proceeding after a failed teach in
* Minor text fixes